Lab 1:

Configuring standard VLANs on Catalyst Switches

Lab Objective:

The objective of this lab exercise is for you to learn and understand how to

configure standard VLANs 1-1001 on Cisco Catalyst IOS switches. In addition to

this, you are also required to familiarize yourself with the commands available

in Cisco IOS to validate and check your configurations.

Lab Purpose:

VLAN configuration is a fundamental skill. VLANs allow you to segment your

network into multiple, smaller broadcast domains. As a Cisco engineer, as well

as in the Cisco CCNA exam, you will be expected to know how to configure VLANs

on Cisco switches.

Certification Level:

This lab is suitable for both CCENT and CCNA certification exam preparation

Lab Difficulty:

This lab has a difficulty rating of 4/10

Readiness Assessment:

When you are ready for your certification exam, you should complete this lab in

no more than 10 minutes

Lab Topology:

Please use the following topology to complete this lab exercise:

Task 1:

In preparation for VLAN

configuration, configure a hostname on Sw1 as well as the VLANs depicted in the

topology.

Task 2:

Configure ports FastEthernet0/5 – FastEthernet0/8 as access ports and assign them to the VLANs specified.

Task 3:

Verify your VLAN configuration

using relevant show commands in Cisco IOS.

This lab is just one of over 100 labs designed to help you prepare for your Cisco CCNA and CCENT exams. You can view the labs for free at www.howtonetwork.net or buy your own copy of the lab book, solution guide and CDs from the howtonetwork.net shop. Platinum members of www.howtonetwork.net can access all the labs and videos online for free.