Cisco CCNA | CCNP Certification Training Site. Cisco tips and tools for exam success. logo video

bandwidth

Printer-Friendly Format

Command

Bandwidth

Use

This command is used to logically set the bandwidth of an interface. This does not affect the physical speed of the link, it only affects routing protocols and other technologies that use bandwidth as a calculation.

Syntax

Router(config-if)#bandwidth <kilobits>

Example

In this example, we change R1's Fa0/0 interface to have a logical bandwidth of 768 kbs.

R1(config-if)#do show int fa0/0 | in BW
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
R1(config-if)#
R1(config-if)#bandwidth 768
R1(config-if)#do show int fa0/0 | in BW
MTU 1500 bytes, BW 768 Kbit, DLY 100 usec,



Back to commands department

 




Printer-Friendly Format
Home | Search | Contact Us | Tell a Friend | Text Size

2006-2012 HowtoNetwork.net All Rights Reserved. Reproduction without permission prohibited.
Reality Press, Midsummer Court, 314 Midsummer Blvd.,Milton Keynes, MK92UB, UK
This site is powered by MemberGate Membership Site Software