Cisco CCNA | CCNP Certification Training Site. Cisco tips and tools for exam success. logo video

ip bandwidth-percent

Printer-Friendly Format

Command

IP Bandwidth-Percent

Use

This command is used to change how much bandwidth the EIGRP routing process can use on a link. By default EIGRP can use up to 40% of the bandwidth.
This is for EIGRP operational traffic, such as queries or hellos.

Syntax

Router(config-if)#ip bandwidth-percent eigrp <AS> <percent>

Example

In this example, we will limit the EIGRP process on R2's Fa0/0 interface to only use 20% of the link.

R2(config-if)#ip bandwidth-percent eigrp 100 20



Back to commands department

 




Printer-Friendly Format
Home | Search | Contact Us | Tell a Friend | Text Size

2006-2012 HowtoNetwork.net All Rights Reserved. Reproduction without permission prohibited.
Reality Press, Midsummer Court, 314 Midsummer Blvd.,Milton Keynes, MK92UB, UK
This site is powered by MemberGate Membership Site Software