website pop up marketing IP OSPF Hello Interval
Cisco CCNA | CCNP Certification Training Site. Cisco tips and tools for exam success. logo video

IP OSPF Hello Interval

Printer-Friendly Format

Command

IP OSPF Hello Interval

Use

Sets the hello interval on an interface.

Syntax

Router(config-if)#ip ospf hello-interval <seconds>

Example

In this example, the hello interval is modified for int fa0/0 on R1. Here's the ospf information for fa0/0 before the change. Notice the
hello interval set to the default value of 10.

R1#conf t
R1(config)#int fa0/0
R1(config-router)#do show ip ospf interface fa0/0
FastEthernet0/0 is up, line protocol is up
Internet Address 10.1.1.1/24, Area 0
Process ID 1, Router ID 111.111.111.111, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 111.111.111.111, Interface address 10.1.1.1
Backup Designated router (ID) 2.2.2.2, Interface address 10.1.1.2
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
oob-resync timeout 40
Hello due in 00:00:00
Supports Link-local Signaling (LLS)
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 1
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 2.2.2.2 (Backup Designated Router)
Suppress hello for 0 neighbor(s)


The hello inteval is changed to 5.

R1(config-if)#ip ospf hello-interval 5


Finally, here's the ospf information for the interface after the change.

R1(config-if)#do show ip ospf interface fa0/0
FastEthernet0/0 is up, line protocol is up
Internet Address 10.1.1.1/24, Area 0
Process ID 1, Router ID 111.111.111.111, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 111.111.111.111, Interface address 10.1.1.1
Backup Designated router (ID) 2.2.2.2, Interface address 10.1.1.2
Timer intervals configured, Hello 5, Dead 20, Wait 20, Retransmit 5
oob-resync timeout 40
Hello due in 00:00:00
Supports Link-local Signaling (LLS)
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 1
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 2.2.2.2 (Backup Designated Router)
Suppress hello for 0 neighbor(s)




Back to commands department




Printer-Friendly Format

This site and/or material is not sponsored by, endorsed by, or affiliated with Cisco Systems, Inc. and/or its affiliates. Cisco®, Cisco Systems®, CCDA™, CCNA™, CCDP™, CCNP™, CCIE™, or CCSI™ are trademarks or registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

Home | Search | Contact Us | Tell a Friend | Text Size

2006-2013 HowtoNetwork.net All Rights Reserved. Reproduction without permission prohibited.
Reality Press, Midsummer Court, 314 Midsummer Blvd.,Milton Keynes, MK92UB, UK

This site is powered by MemberGate Membership Site Software