website pop up marketing logging synchronous
Cisco CCNA | CCNP Certification Training Site. Cisco tips and tools for exam success. logo video

logging synchronous

Printer-Friendly Format


Logging Synchronous


When enabled on a console, logging synchronous causes all router status messages to be displayed on a new line.


Router(config-line)#logging synchronous


For this example, logging synchronous was disabled for console 0 on R2.

R2(config-line)#no logging synchronous

Notice now that when status messages are displayed, they display on the current line. This means that if you are in the middle of typing a command,
status messages will show up where you are typing.

R2(config)#int loopback
*Mar 1 00:37:55.987: %LINK-5-CHANGED: Interface Loopback99, changed state to administratively down
*Mar 1 00:37:56.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback99, changed state to down99

In the text above, the command that we were trying to type was int loopback 99. This got cut off by the status message that was displayed on the
same line.

Back to commands department

Printer-Friendly Format

This site and/or material is not sponsored by, endorsed by, or affiliated with Cisco Systems, Inc. and/or its affiliates. Cisco®, Cisco Systems®, CCDA™, CCNA™, CCDP™, CCNP™, CCIE™, or CCSI™ are trademarks or registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

Home | Search | Contact Us | Tell a Friend | Text Size

2006-2013 All Rights Reserved. Reproduction without permission prohibited.
Reality Press, Midsummer Court, 314 Midsummer Blvd.,Milton Keynes, MK92UB, UK

This site is powered by MemberGate Membership Site Software