howtonetwork.net

Cisco Certification Training

You are here: Home / Show IP DHCP Pool

Show IP DHCP Pool

Command

Show IP DHCP Pool

Use

This command allows you to see any DHCP pool information that is configured on the router..

Syntax

Router#show ip dhcp pool <name>

Example

simple

In the below example we will display the configured DHCP information on R3..

R3#show ip dhcp pool

Pool VLAN_B :
Utilization mark (high/low) : 100 / 0
Subnet size (first/next) : 0 / 0
Total addresses : 254
Leased addresses : 0
Pending event : none
1 subnet is currently in the pool :
Current index IP address range Leased addresses
192.168.1.1 192.168.1.1 – 192.168.1.254 0

Pool VLAN_A :
Utilization mark (high/low) : 100 / 0
Subnet size (first/next) : 0 / 0
Total addresses : 254
Leased addresses : 0
Pending event : none
1 subnet is currently in the pool :
Current index IP address range Leased addresses
10.10.10.1 10.10.10.1 – 10.10.10.254

Alternately, you can view information for just the pool that you are interested in.

R3#show ip dhcp pool VLAN_B

Pool VLAN_B :
Utilization mark (high/low) : 100 / 0
Subnet size (first/next) : 0 / 0
Total addresses : 254
Leased addresses : 0
Pending event : none
1 subnet is currently in the pool :
Current index IP address range Leased addresses
192.168.1.1 192.168.1.1 – 192.168.1.254 0
Get access to over 5 hours of IT webinar videos as well as regular study tips and ideas when you
join our mailing list